Netgear WG111v2

NETGEAR WG111 version 2 802.11g Wireless USB2.0 Adapter

• Chipset: Prism54 (Intersil 3886 and NetChip NET2280)
• usbid: 0846:4240 (both#*Chipsets !)
• Driver: Netgear windows driver Version: NETGEAR, Inc.,10/05/2004, 2.1 from http://www.netgear.com or shipped with the setup CD. To get the driver, unzip it. The ndis drivers are in the ndis directory. Used kernel Running Slackware v10.1 (kernel 2.6.10) ndiswrapper ver 1.1rc3 . There is a native driver for Prism54 that is working on USB support. View its status at Prism54.org

Info

Tested with the driver for Sitecom WL-142, this device supports WPA2, keeps the device "alive" (with driver from netgear, device stops working after a while) and correct some connection problem

Note that the device ID for Sitecom is different, so you need to create alias for it for WG111, e.g., with 'ndiswrapper -d 0846:4240 wlanuig', after which 'ndiswrapper -l' should show 'hardware present'.

Works nearly well (several daily crashes in Summer 2005). Distro-specific: Debian Sarge 2.6.8.1, Ndiswrapper 0.10 Distro-specific: Debian Sid 2.6.8.X, Ndiswrapper 0.12+1.0rc2-1, without rfmon Other project without ndiswrapper : http://jbnote.free.fr/prism54usb/ (seems incomplete in january 2006 - not supporting WEP or WPA)

• Chipset:  ? (Intersil 3887 without NetChip NET2280)

• Distro-specific: Ubuntu 4.10 The Warty Warthog
• Driver: Netgear windows driver Version: NETGEAR, Inc.,06/04/2004, 3.0.18.201 shipped with the setup CD

""ndiswrapper -l"" produces ""hardware not present"" for the ""netwg111"" driver, but the adapter works anyway

Using Windows XP driver from Windows Update / preinstalled?, Version: 3.0.18.201. Taken from Windows directory (XP full pathname: right-click Device Manager's Netgear icon, Properties, Driver details)

ndiswrapper 1.5. athlon-xp, (preempt=yes,smp=yes). Reboot was necessary to get lights a-blinkin. Logging claimed modprobe error -22 until after reboot. Currently misconfigured with setting tx_power failed (80000005) but hope to resolve.

• Distro: Gentoo 2006.0, kernel 2.6.16-r1
• Driver: Windows XP driver from install CD, same as http://kbserver.netgear.com/support_details.asp?dnldID=843 , version 3.0.18.201.

ndiswrapper snapshot as of 6th April 2006 (earlier versions don't work reliably with SMP). Athlon 64 x2 in 32-bit mode (preempt=yes,smp=yes). Label says WG111v2, but it's a WG111v1 as far as the Netgear website is concerned (the ""v2"" driver is presumably for the version with usbid 0846:6a00). Initialization occasionally fails for no reason.