3COM 3CRGPC10075

3COM 3CRGPC10075, 54mbps - Marvell Technology Group Ltd. 88w8335 Libertas 802.11b/g Wireless

• Chipset: Marvell 88w8335
• pciid: 11ab:1faa (rev 43) and (rev 03)
• Driver: 3COM 3CRGPC10075 version 2.0 (May 2006) from installation CD.

http://www.3com.com/products/en_US/detail.jsp?tab=features&sku=3CRGPC10075&pathtype=purchase

Info

The driver available from 3COM’s website for rev03 below did NOT work!

debian linux 2.6.22-2, ndiswrapper 1.47, wireless-tools 29-pre22-1

kanotix ndiswrapper-modules-2.6.14-kanotix-9 (already installed on 2005-04)

---

From http://ubuntuforums.org/showthread.php?t=840787

I switched out my old 22Mbps SMC card in my backup laptop running Hardy Heron for a 3Com from my other laptop.

The SMC was detected nicely and worked for a long time, but I got a bit tired of the speed limitation.

The 3Com card did not do anything at all when I first put it in. I did a bit of searching and found that there are no drivers for it and ndiswrapper is an option.

I downloaded the 3Com drivers from here: http://webprd1.3com.com/swd/jsp/user/manual_download.jsp

I got there from the main 3Com page.

I used Archive Manager to extract the Driver folder.

Then, I used Synaptic to install ndisgtk,ndiswrapper-common and ndiswrapper-utils-1.9

The graphical install of the 3Com driver worked perfectly.

I am now able to use graphical configuration for wireless networks, where I had to use command line for the SMC card. I didn't think that was a driver issue. by JPaganel; June 25th, 2008 at 08:23 PM..