If you are trying to get a device working with ndiswrapper, please help ndiswrapper project wiki by contributing your findings. See HowToContribute

Difference between revisions of "Linksys WUSB600N"

From NDISWrapper
Jump to: navigation, search
(Info)
(Info)
Line 20: Line 20:
 
[[Category:Linksys]]
 
[[Category:Linksys]]
 
[[Category:USB]]
 
[[Category:USB]]
[[Category:WORKING]]
+
[[Category:WORKS]]

Revision as of 05:29, 6 December 2009

Linksys WUSB600N Version 2

  • Chipset: Ralink RT3572
  • usbid: 1737:0079
  • driver: Ralinktech.com driver file: USB (RT2870 /RT2770 /RT307X /RT2070 /RT3572) 09/25/09 XP 32/64 1.4.7.0

Info

Driver did not work. Bad pointer de-reference issues kernal OOPS. Kernel version 2.6.31, compiled from source. ndiswrapper version 1.55 downloaded from Sourceforge download page, compiled without issue. Device was "recognized", wlan0 created, but device otherwise unable to accept configuration commands.

Update:

Device shows signs of life under Unbuntu 9.1 (ndiswrapper 1.55/kernel 2.6.31-15). Device will connect and transfer data, in unsecured mode, "out of the box". Best to boot with device connected, and leave it there, else interface may hang. Haven't, yet, been able to establish a secured connection, but did notice that fiddling with thing may also cause the interface to hang. Once hung, a reboot is required to restore operation.