If you are trying to get a device working with ndiswrapper, please help ndiswrapper project wiki by contributing your findings. See HowToContribute

Difference between revisions of "Belkin F5D7010"

From NDISWrapper
Jump to: navigation, search
Line 50: Line 50:
  
 
Does not work with ndiswrapper.ko supplied with kernel 2.6.18.5 supplied with Vector Linux 5.8 or 2.6.12mdk supplied with Mandriva 2006. Works with new module compiled from ndiswrapper 1.3.4.
 
Does not work with ndiswrapper.ko supplied with kernel 2.6.18.5 supplied with Vector Linux 5.8 or 2.6.12mdk supplied with Mandriva 2006. Works with new module compiled from ndiswrapper 1.3.4.
 +
 +
[[Category:Belkin]]
 +
[[Category:WORKS]]
 +
[[Category:PCMCIA]]

Revision as of 14:45, 4 June 2009

Belkin F5D7010

Info

Gentoo 2.6.7 w/ Ndiswrapper 0.9. WEP works with non-broadcasting essid. WPA works with broadcasting essid with either AES or TKIP ciphers.

Belkin F5D7010 54g (802.11g and 802.11b capable) 32-bit CardBus wireless card (Rev 5000)

  • Chipset: AR5211 (Atheros Communications, Inc. AR5211)
  • pciid: 168c:001a
  • Driver: WINXPNT drivers from retail CDROM BLKWGN.inf

Info

Debian sid with ndiswrapper 1.10, everything working well

Belkin F5D7010 Wireless-G Notebook Adapter

Info

Debian sid/i386, kernel 2.6.7/9, Inspiron 2650. Tried the linux driver (v1.4.3.0) from http://www.ralinktech.com/ – module loaded, interface created, but settings for iwconfig don’t get committed. Tried to get NDIS driver off CD but couldn’t locate/extract INF file. Finally tried NDIS driver for another card using RT2500 (the A-Link above), and (so far) it has worked wonderfully.

Belkin F5D7010 54g (802.11g and 802.11b capable) 32-bit CardBus wireless card

  • Chipset: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
  • pciid: 14e4:4320 (rev 03)
  • Driver: ‘For older Fedora 3 systems:’ files/Drivers/WinMe98/bcmwl5a.inf on the installation CD worked with Fedora kernel 2.6.9-1.681_FC3 and slightly older with ndiswrapper 0.12. Slightly newer kernels required upgrading to ndiswrapper 1.1 final. (WinXP2K/bcmwl5.inf did NOT work.) ‘For modern Fedora 4 systems:’ Driver from http://ftp.us.dell.com/network/R94827.EXE (can be unpacked with “unzip” to find bcmwl5a.inf) works with kernel-2.6.14-1.1656_FC4 and ndiswrapper-1.8-0.lvn.1.4 (you can install this using “yum” if you have the livna repository set up) but gives warning “Forcing parameter IBSSGMode|0 to IBSSGMode|2”. Driver on installation CD segfaults on “modprobe”, but Giri says this should be fixed in CVS version of ndiswrapper as of 30 Jan 2006.

Info

See Distributions for details on how to get this particular card working with a Fedora Core 4 install.

Belkin F5D7010 54g (802.11g and 802.11b capable) 32-bit CardBus wireless card (Rev 02)

  • Chipset: BCM4306 (Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 02))
  • pciid: 14e4:4318
  • subsys: 1799:7010
  • Driver: WINXPNT drivers from retail CDROM (date: 2/18/2005 ver 3.100.64.1) bcmwl5.inf

Info

Ndiswrapper 1.3rc1 on Fedora Core 4 - Kernal 2.6.12-1.1447_FC4.stk16; Bought from BestBuy 9/22/2005, box has “VER.4100” on the bottom. Ndiswrapper installation instructions worked with no hitch. Build/installed on a HP Omnibook 6000.

Does not work with ndiswrapper.ko supplied with kernel 2.6.18.5 supplied with Vector Linux 5.8 or 2.6.12mdk supplied with Mandriva 2006. Works with new module compiled from ndiswrapper 1.3.4.

Retrieved from "http://ndiswrapper.sourceforge.net/wiki/index.php?title=Belkin_F5D7010&oldid=89"