Brinley: Created page with '==Motorola WPCI810G PCI Adapter== * Chipset: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03) * pciid: 14E4:4320 * Driver: http://broadband.motorola.com/…'

2009-07-22T14:32:26Z

Created page with '==Motorola WPCI810G PCI Adapter== * Chipset: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03) * pciid: 14E4:4320 * Driver: http://broadband.motorola.com/…'

New page

==Motorola WPCI810G PCI Adapter==
* Chipset: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
* pciid: 14E4:4320
* Driver: http://broadband.motorola.com/consumers/products/WPCI810g/downloads/WN-WPCI-Web-Update-v1.1.exe

==Info==
This card works with ndiswrapper 0.12 using the "bcmwl5.inf" driver obtainable at Motorola above. Had to set "Country|US" and "SSID|<your ESSID>" in /etc/ndiswrapper/bcmwl5/14E4\:4320.conf Motherboard is ASUS CUBX with wlan0 in shared first shared ISA/PCI slot. If other PCI cards are installed wlan0 does not come up and but no error messages reported (LED does not blink at all, nothing to stdout, syslog, etc., even with DEBUG=3 when building ndiswrapper.ko).

Distro is stock Fedora Core 3 with kernel 2.6.9-1.667.

lspci -vvv string is:

00:0e.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
Subsystem: Motorola: Unknown device 7010
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 5 Region 0: Memory at db800000 (32-bit, non-prefetchable) [size=8K]

colin_ewart (somewhere near) hotmail.com

[[Category:Motorola]]
[[Category:PCI]]
[[Category:WORKS]]

Motorola WPCI810G - Revision history

Brinley: Created page with '==Motorola WPCI810G PCI Adapter== * Chipset: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03) * pciid: 14E4:4320 * Driver: http://broadband.motorola.com/…'