If you are trying to get a device working with ndiswrapper, please help ndiswrapper project wiki by contributing your findings. See HowToContribute
Difference between revisions of "Siemens Gigaset USB 108"
(Update from Valent Turkovic) |
|||
| Line 10: | Line 10: | ||
This work did not use the driver which comes with the CDROM. Good signal strength with 54 Mb/s. Present work cannot test 108 Mb/s due to net limitations. | This work did not use the driver which comes with the CDROM. Good signal strength with 54 Mb/s. Present work cannot test 108 Mb/s due to net limitations. | ||
| − | Download this driver from | + | Download this driver from ftp://ftp.netgear.de/download/WG111T/WG111T_GRV1.2.zip. This driver comes with two sets of .inf and .sys files: athfmwdl and netwg111t. Both of these must be installed with their *.inf files. After that, ndiswrapper-1.7 can be used as in the case of other drivers |
Encryption: WPA-PSK (TKIP) works for this driver installation with the version wpa_supplicant-0.4.7. | Encryption: WPA-PSK (TKIP) works for this driver installation with the version wpa_supplicant-0.4.7. | ||
| Line 16: | Line 16: | ||
129b:160c has been tested with ndiswrapper 1.10; WPA works; 108 MB/s seems to work, too. | 129b:160c has been tested with ndiswrapper 1.10; WPA works; 108 MB/s seems to work, too. | ||
| + | |||
| + | there is also a newer driver version here: | ||
| + | http://kbserver.netgear.com/de-support/wg111t.html | ||
| + | ftp://ftp.netgear.de/download/files/wg111t_2_1_setup.exe | ||
[[Category:Siemens]] | [[Category:Siemens]] | ||
[[Category:USB]] | [[Category:USB]] | ||
[[Category:WORKS]] | [[Category:WORKS]] | ||
Revision as of 09:10, 16 July 2011
SIEMENS GIGASET USB 108 ADAPTER
- Chipset : Atheros 5523
- usbid: 129b:160b 129b:160c
- Drivers: athfmwdl + net5523 (both needed) from CD provided with device
Info
129b:160b has been tested with ndiswrapper 1.8; WEP restricted mode 802.11g (54 MB/S) works; WPA don’t work; 108 MB/s don’t work
Also for 129b:160b, this work indicates good performance of the SIEMENS GIGASET 108 USB ADAPTER in combination with the driver which comes with the NETGEAR WG111T USB adapter. This work did not use the driver which comes with the CDROM. Good signal strength with 54 Mb/s. Present work cannot test 108 Mb/s due to net limitations.
Download this driver from ftp://ftp.netgear.de/download/WG111T/WG111T_GRV1.2.zip. This driver comes with two sets of .inf and .sys files: athfmwdl and netwg111t. Both of these must be installed with their *.inf files. After that, ndiswrapper-1.7 can be used as in the case of other drivers
Encryption: WPA-PSK (TKIP) works for this driver installation with the version wpa_supplicant-0.4.7.
129b:160c has been tested with ndiswrapper 1.10; WPA works; 108 MB/s seems to work, too.
there is also a newer driver version here: http://kbserver.netgear.com/de-support/wg111t.html ftp://ftp.netgear.de/download/files/wg111t_2_1_setup.exe
